today we’re taking a look at a motorized sit-stand desk…Flexispot Customer Support… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. If you do not think me, have a look at the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not only easy to use and fast, but it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be durable) and also a little hesitant (because we all understand how much of a difficulty putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I love the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you ought to understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable television grommets for go through the outdoors container
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had bought this I ‘d have been on the phone with customer care right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my prepare for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at best feels like a cheaper imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website too which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering numerous alternatives and accessories I might however I think I’m happier that they just sent a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of bonus is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Customer Support
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would spend the money it’s gon na take to get into a greater end maker like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a client viewpoint you ‘d most likely be truly delighted to get this in