Find Flexispot Cycle Desk Bike V9 Pro Review 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Cycle Desk Bike V9 Pro Review… you might have seen my evaluation on the uplift desk, if not …

In general, I should say I like the Flexispot E7.

here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.

It’s very easy to assemble, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t believe me, have a look at the video listed below of it running while there’s an individual lying down on it.

The electric raise/lower feature is not just easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a huge fan of:

The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how tough the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both fired up (because this implied it was going to be durable) and also a little reluctant (because we all know just how much of a challenge assembling furnishings can be).

Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.

When put together, I like the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.

The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as many times as you desire throughout the day.

Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable grommets for pass through the outdoors carton

for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had actually bought this I ‘d have been on the phone with customer support immediately they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage double motor which presses the cost of the desk up

an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when

this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed also my prepare for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their site also which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering different alternatives and accessories I could however I think I’m happier that they just sent a basic desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of additionals is the move when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Cycle Desk Bike V9 Pro Review

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the money it’s gon na take to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a customer standpoint you ‘d probably be actually excited to get this in

Published