today we’re having a look at a motorized sit-stand desk…Flexispot Cycling Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. Check out the video below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this implied it was going to be sturdy) and likewise a little hesitant (due to the fact that we all understand just how much of a challenge assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I love the sleek look of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as often times as you want throughout the day.
Finally, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you must know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply extremely rough man if I had actually purchased this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to check out their site also which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various choices and accessories I could however I believe I’m better that they only sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of extras is the move when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Cycling Desk
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance however I would spend the money it’s gon na take to get into a higher end maker like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a consumer perspective you ‘d most likely be truly thrilled to get this in