today we’re taking a look at a motorized sit-stand desk…Flexispot D1D… you might have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. Check out the video below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this implied it was going to be strong) and also a little reluctant (because we all know just how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m positive any of the many varied surfaces that it comes in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as close to that as I could on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough guy if I had actually acquired this I ‘d have been on the phone with customer care right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would give this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my prepare for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a more affordable imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website also which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various alternatives and accessories I might but I believe I’m better that they only sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of bonus is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot D1D
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance however I would invest the additional money it’s gon na require to get into a greater end maker like uplift desk or extremely desk and I have not personally used really desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a client standpoint you ‘d most likely be actually delighted to get this in