today we’re taking a look at a motorized sit-stand desk…Flexispot D7R… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not just easy to use and fast, but it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (because this implied it was going to be sturdy) and also a little hesitant (because all of us know just how much of a difficulty putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once put together, I love the smooth look of this desk. I’m positive any of the many varied finishes that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I might on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you must know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is entirely strange since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually purchased this I ‘d have been on the phone with customer service immediately they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my prepare for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at finest feels like a more affordable replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website also which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various options and accessories I could however I think I’m happier that they only sent a standard desk since as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of bonus is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot D7R
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity however I would invest the additional money it’s gon na require to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally used really desk products so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed but from a client standpoint you ‘d most likely be truly delighted to get this in