today we’re taking a look at a motorized sit-stand desk…Flexispot Day… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not just easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this indicated it was going to be tough) and likewise a little reluctant (due to the fact that we all understand how much of an obstacle assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied finishes that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had actually acquired this I ‘d have been on the phone with customer support immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but more affordable does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my plan for this desk at this moment is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website too which also feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering various choices and accessories I might but I think I’m better that they only sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of bonus is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Day
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would spend the additional money it’s gon na take to enter a higher end producer like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d probably be really thrilled to get this in