today we’re taking a look at a motorized sit-stand desk…Flexispot Delivery… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electrical raise/lower feature is not only easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how tough the Flexispot is.
The practical cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this meant it was going to be strong) and also a little hesitant (because all of us understand just how much of a difficulty putting together furniture can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the streamlined look of this desk. I’m confident any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you should know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough male if I had purchased this I ‘d have been on the phone with customer support immediately they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their website too which also feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various options and devices I might however I think I’m better that they just sent out a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of bonus is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Delivery
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity however I would invest the money it’s gon na require to get into a higher end maker like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged but from a client viewpoint you ‘d most likely be really excited to get this in