today we’re having a look at a motorized sit-stand desk…Flexispot Desk Adapter Holder… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are far more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (since this indicated it was going to be strong) and also a little hesitant (because we all understand how much of a difficulty putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the smooth appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as near that as I could on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had bought this I ‘d have been on the phone with client service immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at best seems like a less expensive imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their site too which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various choices and devices I could however I believe I’m happier that they just sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of additionals is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Desk Adapter Holder
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the money it’s gon na take to enter a higher end maker like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it but their track record is great huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged but from a consumer viewpoint you ‘d most likely be actually excited to get this in