today we’re having a look at a motorized sit-stand desk…Flexispot Desk Alarm… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. If you do not think me, take a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and quick, but it’s likewise surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The convenient cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this indicated it was going to be sturdy) and likewise a little reluctant (because we all know just how much of a difficulty assembling furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I could on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you should understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is entirely unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had acquired this I ‘d have been on the phone with client service right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a less expensive imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their website as well which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering different options and devices I could but I think I’m happier that they just sent out a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of bonus is the move when the core item isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Desk Alarm
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and performance but I would invest the extra money it’s gon na take to enter a higher end manufacturer like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it however their track record is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged but from a client viewpoint you ‘d most likely be really delighted to get this in