today we’re having a look at a motorized sit-stand desk…Flexispot Desk Assembly Video… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (because this implied it was going to be strong) and likewise a little reluctant (since all of us know just how much of an obstacle putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined appearance of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had actually bought this I ‘d have been on the phone with customer service right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed also my plan for this desk at this point is to lose the desk top and came with all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website as well which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous choices and devices I could however I think I’m happier that they just sent a standard desk since as a basic desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Desk Assembly Video
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the extra money it’s gon na take to enter a greater end manufacturer like uplift desk or really desk and I have not personally utilized very desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d probably be actually excited to get this in