today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Australia… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. Check out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower feature is not just easy to use and quick, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how strong the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this suggested it was going to be durable) and also a little hesitant (because all of us know just how much of a difficulty putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the sleek look of this desk. I’m confident any of the many diverse finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as near that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is utterly bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had actually bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my prepare for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their website as well which also feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various options and accessories I might however I think I’m happier that they only sent a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of bonus is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Desk Australia
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would invest the additional money it’s gon na require to get into a higher end maker like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d probably be really thrilled to get this in