today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Bike Australia… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. If you don’t think me, take a look at the video below of it running while there’s a person resting on it.
The electric raise/lower feature is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being functional, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (since this suggested it was going to be durable) and also a little hesitant (since we all know how much of an obstacle assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth look of this desk. I’m confident any of the many diverse surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as near to that as I could on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough man if I had acquired this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual stage double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed too my plan for this desk at this point is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best seems like a more affordable replica of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their site as well which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering various choices and devices I could however I think I’m happier that they just sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Desk Bike Australia
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would invest the money it’s gon na take to enter a greater end maker like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged but from a customer viewpoint you ‘d probably be really excited to get this in