today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Bike Exercise… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. If you do not think me, have a look at the video listed below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are much more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (since this meant it was going to be strong) and also a little reluctant (because we all understand just how much of a challenge putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I could on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you need to understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had acquired this I ‘d have been on the phone with customer service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however cheaper does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged too my prepare for this desk at this point is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best seems like a less expensive imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website too which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering numerous choices and devices I might however I believe I’m happier that they only sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Desk Bike Exercise
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance but I would spend the money it’s gon na take to get into a higher end producer like uplift desk or really desk and I haven’t personally used really desk products so I can’t speak on it but their credibility is excellent huge thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged however from a customer viewpoint you ‘d most likely be actually thrilled to get this in