today we’re having a look at a motorized sit-stand desk…Flexispot Desk Converter… you may have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you don’t believe me, check out the video below of it running while there’s a person lying down on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much thought.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are even more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this meant it was going to be tough) and likewise a little reluctant (due to the fact that all of us understand how much of a challenge assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as many times as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for go through the outdoors container
for the desktop was not damaged in any way which is entirely unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had purchased this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated also to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at finest seems like a more affordable replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which also feels strangely similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering different options and accessories I could however I think I’m better that they just sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of extras is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Desk Converter
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity but I would invest the money it’s gon na require to get into a greater end maker like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it however their reputation is very good big thanks to flexi spot for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed however from a customer perspective you ‘d most likely be truly delighted to get this in