today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Cycle Workwhilewlakign… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. If you do not think me, check out the video below of it operating while there’s a person lying down on it.
The electrical raise/lower feature is not only easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise useful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this indicated it was going to be durable) and also a little hesitant (because all of us understand just how much of a challenge assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek look of this desk. I’m confident any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as many times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as close to that as I might on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you ought to know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with client service right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at finest seems like a less expensive imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their site as well which also feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering different choices and accessories I might but I think I’m better that they just sent out a basic desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Desk Cycle Workwhilewlakign
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would invest the additional money it’s gon na require to enter into a greater end producer like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a customer perspective you ‘d probably be really delighted to get this in