today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Exercise Bike… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you do not think me, have a look at the video listed below of it running while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this indicated it was going to be tough) and also a little hesitant (since all of us understand just how much of an obstacle assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once put together, I like the smooth look of this desk. I’m confident any of the many varied surfaces that it is available in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as near that as I could on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is entirely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had purchased this I ‘d have been on the phone with client service right away they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly definitely where any type of cable management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed also my plan for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at best feels like a cheaper replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their site too which also feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various choices and accessories I might but I believe I’m happier that they just sent out a basic desk because as a basic desk I’m not a fan of the quality control at this cost point and I do not think slapping on a lot of extras is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Desk Exercise Bike
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity however I would invest the extra money it’s gon na take to get into a higher end maker like uplift desk or really desk and I have not personally utilized very desk products so I can’t speak on it however their credibility is very good big thanks to flexi spot for sending this out for review unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d probably be really excited to get this in