today we’re having a look at a motorized sit-stand desk…Flexispot Desk Installation… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and quick, but it’s likewise surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this meant it was going to be durable) and also a little reluctant (because we all understand how much of an obstacle putting together furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m positive any of the many diverse finishes that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite fundamental I tried to get as close to that as I could on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had bought this I ‘d have been on the phone with customer support right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed as well my prepare for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a more affordable imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering numerous options and devices I could however I believe I’m better that they only sent a basic desk because as a basic desk I’m not a fan of the quality control at this rate point and I do not think slapping on a lot of bonus is the move when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Desk Installation
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would invest the money it’s gon na take to get into a greater end maker like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged but from a customer viewpoint you ‘d most likely be actually thrilled to get this in