today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Material… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you do not believe me, check out the video listed below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and quick, however it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much thought.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this meant it was going to be durable) and also a little reluctant (since all of us know just how much of an obstacle assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
Once assembled, I love the sleek appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I could on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is absolutely unusual because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just super rough man if I had actually purchased this I ‘d have been on the phone with client service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site too which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering different options and accessories I could but I think I’m better that they only sent out a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a bunch of extras is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Desk Material
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and performance but I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or extremely desk and I have not personally utilized really desk products so I can’t speak on it but their credibility is very good huge thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be truly thrilled to get this in