today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Not Level… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you do not think me, take a look at the video listed below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this suggested it was going to be durable) and likewise a little reluctant (because we all understand how much of an obstacle putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the streamlined look of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I might on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you should know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is entirely unusual because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had acquired this I ‘d have been on the phone with client service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated also to both the double stage double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at finest seems like a cheaper replica of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do feel free to have a look at their website also which also feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering numerous choices and devices I could but I think I’m happier that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Desk Not Level
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the extra money it’s gon na require to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed but from a consumer viewpoint you ‘d most likely be really thrilled to get this in