today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Says Asr… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not think me, take a look at the video listed below of it running while there’s a person resting on it.
The electric raise/lower function is not just easy to use and quickly, however it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this implied it was going to be tough) and also a little hesitant (due to the fact that we all understand how much of a challenge assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the sleek look of this desk. I’m positive any of the many diverse surfaces that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as near that as I might on uplifts website with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had actually purchased this I ‘d have been on the phone with customer service instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly absolutely where any sort of cable management materials whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged too my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper replica of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their website too which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering numerous choices and accessories I might however I think I’m better that they just sent out a basic desk since as a fundamental desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Desk Says Asr
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would spend the additional money it’s gon na take to enter into a greater end manufacturer like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it but their credibility is very good huge thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a client standpoint you ‘d most likely be truly delighted to get this in