today we’re having a look at a motorized sit-stand desk…Flexispot Desk Setup… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you don’t think me, check out the video listed below of it operating while there’s an individual lying down on it.
The electric raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this meant it was going to be tough) and likewise a little reluctant (because all of us understand just how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I love the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as many times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I might on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually bought this I ‘d have been on the phone with customer support right away they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged as well my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best seems like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their site too which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering different alternatives and devices I could but I believe I’m happier that they just sent out a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of bonus is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Desk Setup
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it but their reputation is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d most likely be really thrilled to get this in