today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Stability… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this indicated it was going to be strong) and likewise a little reluctant (because all of us know just how much of a difficulty putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I love the sleek look of this desk. I’m positive any of the many varied surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as many times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to sleep on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is absolutely unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had bought this I ‘d have been on the phone with client service instantly they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed too my plan for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to have a look at their site also which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various alternatives and devices I might but I think I’m better that they only sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Desk Stability
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the money it’s gon na require to get into a higher end producer like uplift desk or extremely desk and I haven’t personally utilized really desk products so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed however from a client standpoint you ‘d most likely be truly delighted to get this in