today we’re taking a look at a motorized sit-stand desk…Flexispot Desk Timer… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise useful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (considering that this indicated it was going to be tough) and likewise a little reluctant (since we all know just how much of an obstacle assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I might on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually purchased this I ‘d have been on the phone with customer support right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function unusually absolutely where any kind of cable television management materials whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the double stage double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged too my plan for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest feels like a cheaper imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their website also which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering numerous choices and accessories I might however I think I’m better that they just sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of additionals is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Desk Timer
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the money it’s gon na require to get into a greater end producer like uplift desk or very desk and I haven’t personally used extremely desk items so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged however from a consumer viewpoint you ‘d most likely be truly excited to get this in