today we’re having a look at a motorized sit-stand desk…Flexispot Desk Weight… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you don’t think me, have a look at the video below of it running while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being practical, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this implied it was going to be tough) and also a little hesitant (because we all know how much of a challenge putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined look of this desk. I’m positive any of the many diverse surfaces that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as near to that as I might on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you must understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had actually acquired this I ‘d have been on the phone with customer support instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would offer this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but more affordable doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged too my prepare for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a cheaper replica of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to have a look at their website as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our precious time covering different alternatives and accessories I might but I think I’m happier that they just sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Desk Weight
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity however I would spend the additional money it’s gon na take to get into a greater end maker like uplift desk or extremely desk and I haven’t personally used very desk items so I can’t speak on it but their credibility is very good huge thanks to flexi spot for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed but from a client viewpoint you ‘d probably be truly thrilled to get this in