today we’re having a look at a motorized sit-stand desk…Flexispot Deskcise Pro Combines… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not only easy to use and quickly, however it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The practical cable tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this meant it was going to be tough) and likewise a little reluctant (due to the fact that all of us know how much of an obstacle assembling furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined appearance of this desk. I’m confident any of the many diverse surfaces that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as lot of times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near to that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had actually bought this I ‘d have been on the phone with customer support instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged also my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest seems like a more affordable imitation of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website too which also feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering different options and accessories I could but I think I’m happier that they only sent a standard desk since as a standard desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of bonus is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Deskcise Pro Combines
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency but I would invest the money it’s gon na take to enter a greater end manufacturer like uplift desk or extremely desk and I haven’t personally used really desk items so I can’t speak on it but their track record is excellent huge thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a consumer viewpoint you ‘d most likely be really excited to get this in