today we’re taking a look at a motorized sit-stand desk…Flexispot Deutschland… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Check out the video below of it running while there’s a person lying down on it if you don’t think me.
The electric raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being functional, it likewise looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also practical if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more cost effective than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this indicated it was going to be strong) and also a little reluctant (since we all understand how much of a challenge putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I love the smooth appearance of this desk. I’m positive any of the many varied finishes that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near to that as I could on uplifts website with similar configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had acquired this I ‘d have been on the phone with customer service immediately they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my plan for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their site as well which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various options and accessories I could however I think I’m happier that they only sent out a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Deutschland
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and performance but I would invest the money it’s gon na require to enter a higher end maker like uplift desk or very desk and I have not personally utilized very desk products so I can’t speak on it but their reputation is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be really delighted to get this in