today we’re taking a look at a motorized sit-stand desk…Flexispot Dimensions… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Check out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (since this suggested it was going to be durable) and likewise a little hesitant (because we all understand how much of an obstacle putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I love the sleek appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as near to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough man if I had acquired this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed too my plan for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which also feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different choices and accessories I could but I believe I’m better that they just sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Dimensions
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency but I would invest the extra money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their reputation is great big thanks to flexi area for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d most likely be really excited to get this in