today we’re taking a look at a motorized sit-stand desk…Flexispot ʧÖâ≠Ê… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you do not believe me, take a look at the video listed below of it running while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being practical, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are even more economical than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how tough the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this meant it was going to be durable) and also a little hesitant (since we all know just how much of an obstacle putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I love the sleek appearance of this desk. I’m positive any of the many varied surfaces that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as often times as you want throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near to that as I could on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation but as you must understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get doing not have even any cable grommets for go through the outdoors container
for the desktop was not damaged in any way which is entirely strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had purchased this I ‘d have been on the phone with customer care instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually absolutely where any type of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual stage double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged as well my prepare for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site too which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various options and devices I could however I think I’m happier that they just sent out a standard desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot ʧÖâ≠Ê
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency however I would invest the extra money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed but from a customer standpoint you ‘d probably be truly thrilled to get this in