today we’re having a look at a motorized sit-stand desk…Flexispot E01… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. If you do not think me, take a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this meant it was going to be sturdy) and likewise a little reluctant (due to the fact that we all know just how much of an obstacle putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the smooth appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near to that as I might on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with customer care immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed also my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best feels like a more affordable imitation of that it simply does not feel quality and the difference between this desk and my main desk is night and day do feel free to check out their website as well which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various choices and devices I might however I think I’m happier that they only sent out a fundamental desk because as a standard desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of extras is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot E01
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would invest the extra money it’s gon na take to enter a greater end producer like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d probably be actually delighted to get this in