today we’re taking a look at a motorized sit-stand desk…Flexispot E05… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. If you don’t think me, check out the video below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and fast, but it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how tough the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this indicated it was going to be tough) and likewise a little reluctant (due to the fact that we all understand how much of an obstacle putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I love the smooth appearance of this desk. I’m confident any of the many diverse finishes that it comes in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is utterly bizarre due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had acquired this I ‘d have been on the phone with client service instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but less expensive does not mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged too my prepare for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at finest seems like a less expensive replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to check out their site also which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various alternatives and accessories I could however I think I’m better that they only sent out a standard desk since as a standard desk I’m not a fan of the quality control at this rate point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot E05
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na require to get into a higher end producer like uplift desk or very desk and I have not personally used really desk items so I can’t speak on it however their track record is great huge thanks to flexi spot for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a client viewpoint you ‘d most likely be truly thrilled to get this in