today we’re taking a look at a motorized sit-stand desk…Flexispot E1B Manual… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not only easy to use and quick, but it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are even more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this suggested it was going to be durable) and likewise a little reluctant (due to the fact that we all understand how much of a challenge putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as many times as you desire throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as close to that as I might on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had actually purchased this I ‘d have been on the phone with client service immediately they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed too my prepare for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to check out their website too which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering different alternatives and accessories I could but I believe I’m better that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot E1B Manual
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity however I would spend the additional money it’s gon na require to get into a higher end manufacturer like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a client viewpoint you ‘d probably be really excited to get this in