today we’re taking a look at a motorized sit-stand desk…Flexispot E1L… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. If you don’t believe me, check out the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise helpful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how tough the Flexispot is.
The practical cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this indicated it was going to be durable) and likewise a little hesitant (due to the fact that we all know how much of an obstacle putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once assembled, I like the streamlined appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you need to understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is utterly unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had bought this I ‘d have been on the phone with customer service right away they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but cheaper does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged also my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website also which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering different choices and devices I might but I believe I’m better that they only sent out a fundamental desk since as a standard desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of extras is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot E1L
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency but I would invest the additional money it’s gon na take to enter a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized very desk items so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a consumer standpoint you ‘d probably be truly excited to get this in