today we’re taking a look at a motorized sit-stand desk…Flexispot E2B Billiger… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much thought.
On top of being functional, it likewise looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also valuable if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how strong the Flexispot is.
The convenient cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (considering that this implied it was going to be tough) and likewise a little reluctant (because all of us understand just how much of an obstacle assembling furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as many times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get doing not have even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is entirely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually purchased this I ‘d have been on the phone with customer service right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any sort of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my plan for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at finest seems like a cheaper replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous alternatives and devices I could but I think I’m better that they only sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of extras is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot E2B Billiger
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the additional money it’s gon na require to get into a greater end maker like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up damaged but from a customer perspective you ‘d most likely be truly thrilled to get this in