today we’re having a look at a motorized sit-stand desk…Flexispot E2B E5B… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really simple to put together, and it took my 11-year-old child and I (I mainly just monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quick, however it’s also remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being functional, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this indicated it was going to be tough) and likewise a little hesitant (due to the fact that all of us understand just how much of an obstacle assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek look of this desk. I’m confident any of the many diverse finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as many times as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I could on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you should know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough man if I had actually acquired this I ‘d have been on the phone with customer care right away they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any type of cable management materials whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come basic with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their site as well which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering various options and accessories I could however I believe I’m happier that they just sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot E2B E5B
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the money it’s gon na take to enter into a higher end producer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it but their credibility is great huge thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with seeing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d most likely be actually delighted to get this in