today we’re having a look at a motorized sit-stand desk…Flexispot E2B Höhenverstellbarer Schreibtisch… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. If you don’t think me, take a look at the video listed below of it operating while there’s a person lying down on it.
The electrical raise/lower function is not just easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how tough the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this meant it was going to be strong) and also a little reluctant (since we all know how much of a challenge putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I could on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you need to know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable television grommets for pass through the outside carton
for the desktop was not damaged in any way which is entirely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had actually bought this I ‘d have been on the phone with client service immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any sort of cable management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control panel that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift however less expensive does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my prepare for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at finest feels like a more affordable replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their site as well which likewise feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering different alternatives and devices I could however I think I’m better that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot E2B Höhenverstellbarer Schreibtisch
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the extra money it’s gon na take to enter into a higher end maker like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters got here harmed but from a consumer viewpoint you ‘d most likely be really delighted to get this in