today we’re taking a look at a motorized sit-stand desk…Flexispot E2W Height Adjustable Electric Standing Desk… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you don’t believe me, have a look at the video below of it operating while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also helpful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how durable the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this indicated it was going to be strong) and also a little hesitant (due to the fact that all of us understand just how much of a challenge putting together furniture can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined look of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I might on uplifts site with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you need to understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough guy if I had bought this I ‘d have been on the phone with customer care right away they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual stage double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up harmed as well my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest seems like a more affordable imitation of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their site also which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering different options and accessories I could however I believe I’m happier that they only sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a lot of bonus is the relocation when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot E2W Height Adjustable Electric Standing Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would spend the money it’s gon na take to enter into a higher end producer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a client perspective you ‘d probably be actually thrilled to get this in