today we’re having a look at a motorized sit-stand desk…Flexispot E5… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s incredibly sturdy and can hold a great deal of weight. If you do not think me, check out the video listed below of it operating while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are far more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (considering that this indicated it was going to be tough) and also a little hesitant (due to the fact that all of us know how much of a challenge assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I could on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review however as you must understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable grommets for travel through the outdoors container
for the desktop was not harmed in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with client service right away they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any type of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to check out their site too which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering different alternatives and devices I might however I think I’m happier that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of additionals is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot E5
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and performance however I would invest the extra money it’s gon na require to get into a greater end manufacturer like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their credibility is great huge thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed however from a customer standpoint you ‘d probably be really excited to get this in