today we’re taking a look at a motorized sit-stand desk…Flexispot E6 Vs E8… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. Examine out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and quickly, however it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this implied it was going to be durable) and likewise a little hesitant (due to the fact that we all understand just how much of an obstacle assembling furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the streamlined look of this desk. I’m positive any of the many diverse finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I could on uplifts site with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you ought to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is utterly strange since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had actually acquired this I ‘d have been on the phone with customer service right away they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged as well my plan for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to take a look at their website also which also feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering various options and devices I might but I think I’m better that they just sent out a basic desk because as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot E6 Vs E8
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the additional money it’s gon na require to get into a higher end producer like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it but their credibility is very good huge thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d most likely be actually delighted to get this in