today we’re having a look at a motorized sit-stand desk…Flexispot E6B… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was very positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Inspect out the video below of it running while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this implied it was going to be sturdy) and also a little hesitant (since we all understand just how much of an obstacle putting together furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as put together, I like the sleek appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had actually bought this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor dual phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged as well my plan for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their website also which also feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering numerous options and accessories I could however I believe I’m happier that they just sent out a standard desk since as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of additionals is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot E6B
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the money it’s gon na require to enter a higher end producer like uplift desk or really desk and I have not personally used really desk items so I can’t speak on it however their reputation is excellent big thanks to flexi area for sending this out for review sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters showed up harmed however from a client viewpoint you ‘d probably be really excited to get this in