today we’re taking a look at a motorized sit-stand desk…Flexispot E7 Amazon… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. If you don’t believe me, check out the video below of it running while there’s an individual resting on it.
The electric raise/lower feature is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this indicated it was going to be tough) and likewise a little hesitant (due to the fact that we all understand just how much of an obstacle assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as often times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I might on uplifts site with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you need to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for go through the outside container
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually bought this I ‘d have been on the phone with client service immediately they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual stage double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed too my plan for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do feel free to have a look at their site too which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various choices and devices I could but I think I’m happier that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot E7 Amazon
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the money it’s gon na take to enter a higher end producer like uplift desk or very desk and I haven’t personally used extremely desk products so I can’t speak on it however their reputation is great huge thanks to flexi area for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed but from a client standpoint you ‘d most likely be really excited to get this in