today we’re taking a look at a motorized sit-stand desk…Flexispot E7 E3… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (since this meant it was going to be tough) and likewise a little reluctant (because all of us know just how much of an obstacle putting together furniture can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek look of this desk. I’m confident any of the many diverse surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as many times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near that as I could on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely unusual because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had actually acquired this I ‘d have been on the phone with client service right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control board that enables up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged also my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at best seems like a more affordable replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their site also which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering numerous options and accessories I might but I think I’m better that they only sent out a standard desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot E7 E3
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na take to get into a greater end maker like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a client viewpoint you ‘d probably be really thrilled to get this in