today we’re taking a look at a motorized sit-stand desk…Flexispot E7 Ikea… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you do not think me, take a look at the video below of it running while there’s a person resting on it.
The electrical raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much idea.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise valuable if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The practical cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both fired up (given that this meant it was going to be strong) and also a little reluctant (because we all know just how much of a challenge putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I love the smooth appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review but as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough guy if I had acquired this I ‘d have been on the phone with customer service instantly they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however more affordable does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged as well my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive replica of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to have a look at their website also which also feels strangely comparable to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering numerous choices and accessories I could but I think I’m better that they only sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a bunch of additionals is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot E7 Ikea
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would invest the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or very desk and I have not personally utilized really desk items so I can’t speak on it but their track record is great big thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d probably be truly excited to get this in