today we’re having a look at a motorized sit-stand desk…Flexispot E7 Montage… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t think me.
The electric raise/lower function is not only easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much thought.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also valuable if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a big fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how durable the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this meant it was going to be durable) and also a little reluctant (because we all know just how much of a difficulty putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the streamlined appearance of this desk. I’m positive any of the many varied finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to take a nap on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I might on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you should know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is utterly strange because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had actually bought this I ‘d have been on the phone with client service right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually definitely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated also to both the double stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at finest seems like a cheaper imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their website too which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various options and devices I might but I believe I’m better that they just sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot E7 Montage
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity however I would spend the additional money it’s gon na take to get into a greater end maker like uplift desk or very desk and I have not personally used very desk items so I can’t speak on it however their credibility is great big thanks to flexi area for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a consumer standpoint you ‘d most likely be really thrilled to get this in