today we’re taking a look at a motorized sit-stand desk…Flexispot E8 Bamboo… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. If you don’t think me, take a look at the video below of it running while there’s an individual resting on it.
The electric raise/lower function is not only easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much thought.
On top of being functional, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this implied it was going to be tough) and likewise a little reluctant (because all of us understand just how much of a difficulty putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the smooth appearance of this desk. I’m confident any of the many varied finishes that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch between sitting and standing as sometimes as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review but as you need to understand by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is utterly unusual because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough male if I had purchased this I ‘d have been on the phone with client service instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly absolutely where any type of cable management products whatsoever the frame on this system is a single motor dual phase design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived damaged too my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a more affordable imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website also which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering different options and accessories I might however I think I’m happier that they just sent a basic desk because as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot E8 Bamboo
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the money it’s gon na require to get into a higher end producer like uplift desk or very desk and I haven’t personally utilized very desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed but from a consumer perspective you ‘d most likely be really thrilled to get this in