today we’re having a look at a motorized sit-stand desk…Flexispot E8 Standing Desk Ireland… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you do not think me, have a look at the video below of it running while there’s a person lying down on it.
The electrical raise/lower function is not just easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this implied it was going to be durable) and also a little reluctant (due to the fact that we all know how much of a challenge putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near that as I might on uplifts website with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is entirely bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had purchased this I ‘d have been on the phone with customer care instantly they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly absolutely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to check out their website too which also feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our valuable time covering numerous options and devices I might however I think I’m better that they only sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot E8 Standing Desk Ireland
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the additional money it’s gon na require to get into a greater end producer like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a consumer perspective you ‘d most likely be really delighted to get this in