today we’re having a look at a motorized sit-stand desk…Flexispot Eb2B… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Check out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electric raise/lower feature is not just easy to use and fast, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it also looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how strong the Flexispot is.
The practical cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be durable) and also a little hesitant (since all of us understand just how much of an obstacle putting together furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When put together, I like the sleek look of this desk. I’m positive any of the many diverse finishes that it can be found in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite standard I tried to get as near to that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had actually bought this I ‘d have been on the phone with customer service right away they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control board that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift model over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their website too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering different alternatives and accessories I could but I think I’m better that they only sent out a fundamental desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of additionals is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Eb2B
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity however I would invest the additional money it’s gon na take to enter into a higher end manufacturer like uplift desk or very desk and I haven’t personally used very desk products so I can’t speak on it however their track record is great big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d probably be truly thrilled to get this in