today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1 Electric White Standing Desk… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. If you do not think me, have a look at the video listed below of it running while there’s a person resting on it.
The electric raise/lower feature is not just easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being functional, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this meant it was going to be tough) and likewise a little reluctant (due to the fact that we all know just how much of a challenge putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it can be found in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I tried to get as near that as I could on uplifts website with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you need to know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get lacking even any cable grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had actually acquired this I ‘d have been on the phone with customer support immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely absolutely where any type of cable management products whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come basic with the control board that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed too my prepare for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a less expensive replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their website also which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering various alternatives and accessories I might however I think I’m better that they only sent out a standard desk since as a basic desk I’m not a fan of the quality control at this cost point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Ec1 Electric White Standing Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it but their reputation is very good huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a customer viewpoint you ‘d probably be truly delighted to get this in