today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1B Installation… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you do not believe me, have a look at the video below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not only easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much idea.
On top of being functional, it likewise looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this meant it was going to be sturdy) and also a little reluctant (due to the fact that we all know how much of a challenge putting together furnishings can be).
The good news is, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the smooth look of this desk. I’m confident any of the many varied finishes that it can be found in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I might on uplifts site with similar setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had actually bought this I ‘d have been on the phone with client service instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually definitely where any kind of cable management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed too my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive replica of that it simply doesn’t feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to take a look at their website also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different options and accessories I might but I believe I’m better that they just sent out a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of extras is the move when the core item isn’t what it must be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Ec1B Installation
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity but I would spend the additional money it’s gon na require to enter a greater end manufacturer like uplift desk or really desk and I have not personally utilized very desk items so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a customer perspective you ‘d most likely be really thrilled to get this in