today we’re having a look at a motorized sit-stand desk…Flexispot Ec2… you may have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. If you do not believe me, have a look at the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and fast, but it’s likewise surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The convenient cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this implied it was going to be strong) and likewise a little hesitant (because we all know how much of a difficulty assembling furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the smooth look of this desk. I’m confident any of the many diverse surfaces that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as near to that as I might on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get doing not have even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had bought this I ‘d have been on the phone with customer support instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not indicate inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged too my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to take a look at their website also which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering various choices and accessories I might but I think I’m happier that they only sent out a basic desk because as a standard desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Ec2
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the additional money it’s gon na require to enter into a higher end producer like uplift desk or really desk and I have not personally used very desk products so I can’t speak on it but their reputation is very good big thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a customer standpoint you ‘d most likely be truly excited to get this in