today we’re taking a look at a motorized sit-stand desk…Flexispot Ec4… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely simple to put together, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t think me.
The electric raise/lower function is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it also looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be sturdy) and also a little hesitant (because all of us know just how much of a challenge assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the streamlined look of this desk. I’m positive any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, efficient, and quiet to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is quite basic I attempted to get as close to that as I could on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had purchased this I ‘d have been on the phone with customer service right away they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated as well to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged as well my prepare for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at finest seems like a cheaper replica of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do do not hesitate to have a look at their site as well which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering numerous choices and devices I could however I think I’m happier that they just sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Ec4
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity however I would invest the extra money it’s gon na require to get into a greater end producer like uplift desk or very desk and I haven’t personally utilized very desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up harmed however from a client perspective you ‘d most likely be truly excited to get this in